44208-00006-000 DSV3-SP User’s Manual
Rev 0B
2/12/2009
6
Copyright © 2009 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
2
Unpacking & Inventory
Depending on the number of terminals ordered, your
DSV3
units and accessories may be shipped in either
a single-pack box or a multi pack-box. Carefully open the shipping box and use the following Shipping
Box Inventory list to verify the contents.
Shipping Box Inventory:
•
DSV3 Mobile Biometric Terminal
•
Universal (90-240 VAC input) DC power/charging adapter.
•
AC power cord for DC power/charging adapter. (Plug depends on country of destination)
•
Documentation, including: User Manual (on CD), End User License Agreement, and Quick-
Reference Guide.
Please retain the shipping box in the event you need to return your product for service.
3
Initial Setup
•
Each unit is shipped with one Lithium Polymer battery installed as shown below.
•
It is recommended that you fully charge the internal battery before use to maximize operating time
before recharging is required. The DSV3 contains an integrated charging circuit that allows the
batteries to be charged inside the unit whenever the unit is properly connected to the AC adapter.
•
The unit may be operated when connected via the AC adapter, regardless of the charge state of the
internal battery.
Please refer to Section 4.44.4“Battery Charging and Replacement”, for additional instructions and
safety information.
