![background image](http://html1.mh-extra.com/html/datastrip/dsv3-sp/dsv3-sp_user-manual_3708246020.webp)
44208-00006-000 DSV3-SP User’s Manual
Rev 0B
2/12/2009
19
Copyright © 2009 by Datastrip, Inc. All rights reserved.
Reproduction in whole or in part is prohibited.
6.3
DsVerify Registry Saver Utility (RegistrySaver.exe)
This application is used to save the current registry settings to flash memory. This is very useful after
adding applications (or applications components such as ActiveX controls) to DSV3 products that require
some aspect of the behavior to be registered. When the DSV3 terminal is powered-on, the saved registry
is read and used as part of WinCE startup. Datastrip ActiveX components are registered (see
DsVerifyRegInst application) and then the registry settings are saved using this application. The registry
can also be saved by hitting “Suspend” function that is located under the Start menu button, but this
application is provided to save the registry to the Storage Card without having to warm-start the unit.
6.4
Fingerprint Capture Utility (DsVerifyFpCaptureTest.exe)
This application demonstrates the capabilities of the fingerprint image sensor on the DSV3, and it
provides a means of exercising the fingerprint imaging system. The application has several buttons that
allow a user to Scan to the display or Scan to File. Since this application is provided as source code in the
SDK, it is often used as an example for developers to observe how typical application software can
interface to the fingerprint subsystem.
The source code for this application is provided in the SDK for
developer use.
7
Loading Software and Firmware
7.1
Loading DSV3 Software Updates
The DsVerify2SoftwareUpdate application permits the user to download software updates from several
source locations are as list below:
•
CAB files located on a CF memory card: call Storage Card
•
CAB files located on a USB flash drive: call Hard Disk 2
•
CAB files loaded from an FTP server, (requires a username and password to a valid account.
7.1.1
DSV3 Software Update Procedure: Using a CF Card
NOTE: It is recommended that upgrades be done with the unit operating on the AC adapter to ensure that
the unit does not lose power during this procedure. This upgrade process should take approximately 3.5
minutes to complete.
•
Insert the CF Card containing the new CAB file into the external CF slot.
•
Power up the DSV3 terminal.
•
When the device is finished booting, double tap
My Device
and select
Hard Disk \ DSV3
.
•
Double tap the
DsVerify2SoftwareUpdate
utility.
•
Scroll through the options on the
Server
scroll box and select the
Storage Card
entry (you must
scroll down to make selection).
•
Username and Password are not necessary for this procedure
•
Select most recent appropriate source file
•
Click
Update
(This step will take approximately 2.5 minutes.
•
Click
Reboot
(The registry will be cleared prior to shutdown).
•
Power up the unit
•
The DSV3 registration program will automatically open. Select the button for the device that you
are registering (
DSV3-SP
or
DSV3-EP
). Select [OK] and wait. (This process will take a few
seconds).
•
Click
[Ok]
in the “
Hurray!
” box when it appears, then close the application window.
•
Double tap
My Device
and select
Hard Disk \ DSV3
.
•
Double tap the Registry Saver program (
RegistrySaver.exe
) to launch it.