Datamax PrintPAD 1700 Скачать руководство пользователя страница 93

Страница: 93 / 145

PrintPAD CN70/70e USER'S GUIDE

External charge-capable printers can be used with various Datamax-O’Neil accessories, such as the truck mount

bracket. When an external charge-capable printer is mounted to one of these accessories, the printer's batteries are

automatically charged. For more information, see the instruction sheet(s) included with the accessories.

Warning: Use of any product not approved by Datamax-O’Neil for use with their printers could cause damage to

the batteries and/or printer and will void the warranty.

DO NOT plug the DC jack power supply into the printer if the printer is being used in conjunction with an external

charging bracket, mount, or stand.

Failure to observe the instructions and/or warnings specified in the documentation may result in damage to your

printer. Datamax-O’Neil does not accept liability for resulting damages or injuries.

Содержание PrintPAD 1700


















































































































































Результаты поиска

Содержание PrintPAD 1700

Отзывы:

Бренды по названию

Популярные бренды

Datamax PrintPAD 1700, Руководство пользователя

Результаты поиска

Содержание PrintPAD 1700

Отзывы:

Бренды по названию

Популярные бренды