DATAMARS
R-IN 1300 MID User Manual – Rev
3.0
34 (40)
7.3.4 IC
(C
ANADA
)
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The device has been designed to operate with the antennas listed below, and having a maximum gain
of 2 dB. Antennas not included in this list or having a gain greater than 2 dB are strictly prohibited for
use with this device. The required antenna impedance is 50 ohms.
List of antennas:
Datamars antenna A-ST1330 TT
Please ask for more antennas which are not listed above.
In order to reduce potential radio interferences to other users, select the antenna type and gain as
follows:
equivalent isotropically radiated power (e.i.r.p.) not higher than the permitted one for a successful
communication.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
7.3.5 CE
CERTIFICATION
The system R-IN1300 MID is in accordance with the requirements of protection, which are defined in
the regulation concerning the electromagnetic tolerability EN301 489-1, -3, emitted by the council for
the harmonisation of regulations in the member countries. The European Community regulation for
Low Frequency, EN 60950, is respected.
The R-IN1300 MID system fulfils the requirements of this regulation.
7.3.6 W
ARRANTY
If the reader is opened by not certified personnel by mistake the warranty is voided and we cannot
guarantee the fulfillments of the above-mentioned regulations.
