DATAMARS
R-IN 1300 MID User Manual – Rev
3.0
28 (40)
5.2
USB
M
ASS
S
TORAGE
E
MULATION
(MID
P
LUS
O
NLY
)
To use the mass storage emulation please follow carefully the following instructions.
At the beginning of the manipulation, the reader is assumed to be turned off.
•
Make sure that your PC and the R-IN1300 are
NOT
connected via USB-cable.
•
Turn the reader on.
•
If not yet selected, activate the “
USB Mass Storage Emulator
” functionality with *us2” (on
terminal) or via GUI.
•
Start reading: the detected UIDs are written into the journal-file (duplicated UIDs are filtered –
each UID is written only once )
•
Stop reading
•
Plug in the USB-cable and connect your PC with the R-IN1300 (USB-cable AB)
•
For technical reason wait 4-5 seconds so that the system can prepare the journal-file.
•
Find the journal-file:
use Explorer
(ie: Drive “F:\R-IN1300\journals\journal_HF.cvs”
Now
copy
the journal-file on your LocalDisk and open the copy.
NB:
If you do not find the journal-file, unplug the USB-Cable and plug it in again until the system
detects the presence of the file.
