Datalogic QuickScan Lite QW2400, Руководство по продукции

Страница: 221 / 288

Symbology Selection Enter/Exit Programming Mode
Product Reference Guide 227
Micro QR Code
Set Length 2
This feature specifies one of the bar code lengths for Micro QR Code Length
Control on page 225 . Length 2 is the maximum label length if in Variable
Length Mode, or the second fixed length if in Fixed Length Mode. Characters
can be set from 0001 to 0035 characters in increments of 0001 (pad with
zeroes).
See
page 259 for detailed instructions on setting this feature.
Select QR Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CMQL2
~
DEFAULT
Length 2 is 0035 Characters