Datalogic QuickScan Lite QW2400, Руководство по продукции

Страница: 202 / 288

Enter/Exit Programming Mode China Sensible Code
208 QuickScan™ Lite QW2400
China Sensible Code
Set Length 1
Specifies one of the bar code lengths for China Sensible Code Length Control
on page 207 . Length 1 is the minimum label length if in Variable Length Mode,
or the first fixed length if in Fixed Length Mode. Characters can be set from
0001 to 7,827 characters in increments of 0001 (pad with zeroes).
See
page 257 for detailed instructions on setting this feature.
Select China Sensible Code Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CCSL1
~
0001 = Length 1 is 1 Character
DEFAULT