Datalogic QuickScan Lite QW2400, Руководство по продукции

Страница: 199 / 288

Symbology Selection Enter/Exit Programming Mode
Product Reference Guide 205
Aztec Code Set Length 1
Specifies one of the bar code lengths for Aztec Code Length Control on page
204 . Length 1 is the minimum label length if in Variable Length Mode, or the
first fixed length if in Fixed Length Mode. Characters can be set from 0001 to
3,832 characters in increments of 0001 (pad with zeroes).
See
page 257 for detailed instructions on setting this feature.
Select Aztec Code Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CAZL1
~
DEFAULT
0001 = Length 1 is 1 Character