Datalogic QuickScan Lite QW2400, Руководство по продукции

Страница: 203 / 288

Symbology Selection Enter/Exit Programming Mode
Product Reference Guide 209
China Sensible Code Set Length 2
This feature specifies one of the bar code lengths for China Sensible Code
Length Control on page 207 . Length 2 is the maximum label length if in Vari-
able Length Mode, or the second fixed length if in Fixed Length Mode. Charac-
ters can be set from 0001 to 7,827 characters in increments of 0001 (pad with
zeroes).
See
page 259 for detailed instructions on setting this feature.
Select China Sensible Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
acters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
CANCEL
$CCSL2
~
Length 2 is 7,827 Characters DEFAULT