Datalogic PowerScan BT8300 Family, Руководство по продукции

Страница: 91 / 192

Enter Configuration Exit and Save Configuration
Ì$+;Î
ADVANCED FORMATTING
Ì$-?Î
Product Reference Guide 85
6 Define Code Fields
define code fields
Each code field length can be set by either:
a) defining a field separator character to be found in the code itself. In this case you can
choose to
discard the code separator character or include it as the last character of the
field.
OR BY
b) defining a match character to be found consecutively repeated in the code itself. In this
case the field ends with the first character that does not match.
OR BY
c) specifying a specific character length up to the maximum of 99 characters.
OR BY
d) selecting the last field as variable length (if any).
You must define the same number of fields as selected in step 5, including fields that will not be transmitted.
DEFINE FIELD 1 BY:
EITHER
field separator
a)
 ÌHG0`Î
Read the field separator character from the HEX table. Range of characters = 00-FE .
discard separator include separator
Ì01Î Ì12Î
OR
match character
b)

ÌHG3iÎ
Read the match character from the HEX table. Range of characters = 00-FE .
OR
field length
c)

ÌHG1cÎ
Read two numbers in the range 01 to 99 to define the field length.
OR
this is the last field (variable length)
d)

ÌHG2fÎ