Datalogic PowerScan BT8300 Family, Руководство по продукции

Страница: 157 / 192

REFERENCES
Product Reference Guide 151
5.17.2 Scanner Code ID
The default Data Format is valid for all BT8300 models. Code Identifer and Code len TX (on pages 71,76 in this manual)
are also valid for DK models. The item configuration is part of the cradle configuration and is applied to the scanner
system.
Optionally, the DK 16-key scanner can be set for:

Scanner Code ID

Scanner Code Len TX
(with the same optional values as for standard formatting)
Differently from the other DK formatting, these two configuration items have priority over the corresponding standard
formatting, and hide or substitute for them.
As a result the BT8300-DK can have the following configuration scenarios:
Scanner Code ID = Disable
The settings from the standard Code ID on page 71 will be used (if programmed).
Scanner Code ID = any different value from Disable (option 1,2,3 – Datalogic standard, AIM standard, or custom)
Use the specific DK Scanner Code ID instead of the standard Code ID. DK Scanner Code ID will be applied and will take
priority over any standard Code ID settings, even if programmed.
5.17.3 Scanner Code Length
The behavior of Scanner Code Length is similar to that described above for Scanner Code ID.
As a result the BT8300-DK can have the following configuration scenarios:
Scanner Code Length = Disable
The settings from the standard Code Len TX on page 76 will be used (if programmed).
Scanner Code Length = any different value from Disable (variable digit format, fixed digit format)
Use the specific DK Scanner Code Length instead of the standard Code Len TX. Scanner Code Length will be applied and
will take priority over any standard Code Len TX settings, even if programmed.
NOTE: Both of these configuration items are part of the scanner configuration but are applied to the whole system. The
configuration item overwrites the default Data Format .