Datalogic PowerScan BT8300 Family, Руководство по продукции

Страница: 120 / 192

Enter Configuration Exit and Save Configuration
Ì$+;Î
16-KEY DK MODEL PARAMETERS
Ì$-?Î
114 PowerScan™ BT8300 Family
FUNCTION KEY PROGRAMMING
There are four function keys, F1, F2, F3, F4, plus the SHIFT key (
↑ ),
which can be defined as Function 5. Each of these keys can be
programmed to perform a user-assigned function. This is done by associating a function key with an entry in the String Table, which is a
database resident on the 16-key PowerScan. You can select either a predefined command or define your own custom string. See the
“String Table” command on page 114 to define customized strings for the String Table. See the “Shift Key Programming” command on
page 116 to define the SHIFT key as F5.
Each function key has an associated mnemonic label which shows in the display when active. The default labels are shown in the table
below. To program the function key labels, see “Function Key Label” command on page 115.
The following table shows the list of commands and available strings.
CMD_ID Name Function Default Label
0 ENTER CMD (Same as ENTER_KEY)

1 String 1 Associate with String 1 from the String
Table <first 3 char>
2 String 2 Associate with String 2 from the String
Table <first 3 char>
3 String 3 Associate with String 3 from the String
Table <first 3 char>
4 String 4 Associate with String 4 from the String
Table <first 3 char>
5 String 5 Associate with String 5 from the String
Table <first 3 char>
6 Backlight CMD Toggle the backlight ON/OFF Lgt
7 Clear CMD Cancel ALL data entered in the edit field CLR
8 Backspace CMD Delete one char per key press from an
edit field
←
9 Recall Last CMD If pressed once it recalls from memory
the last code sent out; If pressed twice it
will attempt to resend the last sent code
Rec
A Show Watch Display the internal time Tim
define function key
 Read the above code to associate a Function Key or the Shift key (if defined as F5) .
 Specify which Function Key you want to associate (F1 – F4 or Shift
↑ F5
) by scanning a barcode (1-5) from the hex numeric table in
the back of this manual.
 Select the label command you want to associate from the table on page 114. Scan a barcode from the hex numeric table
corresponding to the command ID (0-A)
Example: To define Function Key 1= Clear command
Define Function Key Func Key # CMD ID
Read + 1 + 7
