Datalogic Magellan 8500Xt, Руководство по продукции, Страница: 61 / 480

Product Reference Guide
2-31
Model 960RD: Placing and Installing the Remote Scale Display
(Short Pedestal Base ONLY)
1. Determine where you want to install the Remote Scale Display
based on your counter design, the viewing angle and lighting con-
siderations discussed previously. Reference
Figure 2-16
for the dis-
play’s physical dimensions.
2. Use the short pedestal base template provided in
Figure 2-1 8
to
mark locations of the mounting screw and cable routing holes.
The mounting screw holes are on 3
3
/8” (8.57 cm) centers.
NOTE
Before drilling, ensure the holes in your base match with the holes indi-
cated on the template.
3. The cable can either be routed through a
3
/4” (19 mm) diameter
hole directly under the mounting base or through the cutout in
the back of the base (see
Figure 2-20
).
4. Drill the mounting screw holes using a drill bit of the appropriate
diameter for your mounting screws or bolts.
5. Drill the cable routing hole using a
3
/4” (19 mm) drill bit
(optional).
It may be necessary to shorten the stalk that supports the display head so
that the display is installed at eye level.