manualshive.com logo in svg

Datalogic Magellan 8500Xt, Руководство по продукции, Страница: 471 / 480

Поделиться
Скачать
Datalogic Magellan 8500Xt Скачать руководство пользователя страница 471

Product Reference Guide

 

F-9

MSI/Plessey

•

Check character must be included in label data.

•

Label length including check character and excluding prefix char-
acter must meet requirements imposed by the main scanner's 
fixed or variable label length control for this symbology type.

•

Prefix must be an ASCII character '@'.

•

Example: '@144769254'.

Code 93

•

Prefix must be an ASCII character '&'.

•

Label length excluding prefix character must meet requirements 
imposed by the main scanner's fixed or variable label length con-
trol for this symbology type.

•

Example: '&Code93-test'.

PDF417

•

Prefix must be an ASCII character 'P'.

•

Label length excluding prefix character cannot exceed 300 charac-
ters. In addition to this, label length excluding prefix character must 
meet requirements imposed by the main scanner’s fixed or variable 
label length control for this symbology type.

AIM Formats

AIM specifies a 3-character string that is attached as a prefix to the label 
data for transmission. Because AIM specifies one identifier for UPC-A, 
UPC-E and EAN-13 labels, UPC-A, UPC-E and EAN-13 will be received 
from the handheld and transmitted by the scanner as EAN-13. The ']' 
character must be the first character received in the label transmission 
from the handheld.

The following sections describe the prefix strings and identify what spe-
cific label characteristics can be supported.

UPC-A

•

AIM does not specify UPC-A as a separate symbology using this 
transmission format - labels will be transmitted as EAN-13.

Содержание Magellan 8500Xt

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов