manualshive.com logo in svg

Datalogic Magellan 8500Xt, Руководство по продукции, Страница: 317 / 480

Поделиться
Скачать
Datalogic Magellan 8500Xt Скачать руководство пользователя страница 317

Product Reference Guide

 

7-179

Addons

The scanner is capable of processing different types of addon codes, 
including:

•

2-Digit Supplemental

•

5-Digit Supplemental

Options are provided on the following pages for your convenience:

•

Disable all addons — The scanner will not look for or read addons.

•

Optional 2-Digit and 5-Digit Supplemental — Barcodes can be 
read which include 2-Digit or 5-Digit Supplementals, however, it is 
not required that addons be included in barcodes.

NOTE

To set this feature:

1. Scan the SWITCH barcode.

2. Scan the barcode representing the desired option on this and the fol-

lowing page. You’ll need to cover any unused barcodes on facing 
pages to ensure that the scanner reads only the barcode you intend 
to scan.

3. Complete the programming sequence by scanning the SWITCH 

barcode.

ADDONS = DISABLE

Contact customer support for advanced programming of optional and 
conditional addons.

Содержание Magellan 8500Xt

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов