Datalogic DS6100, Руководство по установке

Страница: 10 / 59

ix
WARNING
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in exposure to hazardous visible laser light.
The laser light is visible to the human eye and is emitted from the window on
the side of the reader (Figure A,
1
).
Warning labels indicating exposure to laser light and the device classification
are applied onto the body of the scanner (Figure A,
4
, Figure B,
10
,
11
):
Model No. Amp.
Serial No.
DATALOGIC S.P.A. Via Candini, 2
40012 LIPPO DI CALDERARA (BO) ITALY
Manufactured Volt
This product conforms to the applicable requirements of
21CFR1040 at the date of manufacture.
Warning and device class labels
Disconnect the power supply when opening the device during maintenance or
installation to avoid exposure to hazardous laser light.
The laser diode used in this device is classified as a Class 3B laser product
according to IEC 825-1 regulations and as a Class IIIb laser product according
to CDRH regulations. As it is not possible to apply a classification label on the
laser diode used in this device, the following label is reproduced here:
LASER LIGHT
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
MAXIMUM OUTPUT RADIATION 10 mW
EMITTED WAVE LENGTH 650~680 nm
TO IEC 825-1 (1993)
Laser diode class label
Any violation of the optic parts in particular can cause radiation up to the
maximum level of the laser diode (10 mW at 650~680 nm).