Datalogic AccuLazr AL5010 страница 177 Скачать руководство пользователя

Страница: 177 / 240

AccuLazr

™

AL5010 Product Line Manual

Appendix C: AccuLazr

™

User Interface

169

•

None:

Nothing is sent for a no-read

•

Repeat Character:

Tthe specified “repeated character” is

sent.

•

User Defined:

A user specified message is sent.

Multiple Bar Code – Select

None

Repeat Character

, or

User

Defined

from the drop-down list.

•

None:

A multiple bar code condition will be reported as a

“Read” of the first bar code reported.

•

Repeat Character:

The specified “repeated character” is

sent.

•

User Defined:

A user specified message.

Match - Select

None

Send Bar Code

, or

User Defined

from

the drop-down list.

•

None:

If the bar code matches any of the match codes, no

message is sent.

•

Send Bar Code

: The bar code is sent.

•

User Defined:

A user specified message is sent.

No Match – Select

None

Repeat Character

, or

User Defined

from the drop-down list.

•

None:

If the bar code does not match any of the match

codes (or was a no-read), no message is sent.

•

Repeat Character:

The specified “repeated character” is

sent.

•

User Defined:

A user specified message.

No Match Read – Select

None

Send Bar Code

, or

User

Defined

from the drop-down list.

•

None:

if a valid bar code was read but it does not match

any of the match codes, no message is sent.

•

Send Bar Code

: The bar code is sent.

•

User Defined:

A user specified message is sent.

Append QQ (code quality) to message – When enabled, a two

digit “code quality” indication (number from 00 to 99) is

appended to the bar code message. The code quality value is

separated from the message with the specified separator.

Append Distance to message – When enabled, the approximate

distance to the bar code can be appended to the bar code

message. The distance data is separated from the message

with the specified separator.

Heart Beat Message – When enabled, if no other message is

sent for the time period specified in Heart Beat Time Out, the

specified heart beat message string is sent. A time-out of zero

(0) disables the heart beat message.

Heart Beat Time Out (0-30,000 ms) – 0 = Disable Heart Beat

Message, 1-30,000 = Delay before sending Heart Beat

Message.

Modify Settings > Trigger

There are three options for trigger source:

A3-AL5010_User Interface_R20.doc

Accu-Sort Systems, Inc.

Содержание AccuLazr AL5010

















































































































































































































































Результаты поиска

Содержание AccuLazr AL5010

Отзывы:

Похожие инструкции для AccuLazr AL5010

Бренды по названию

Популярные бренды

Datalogic AccuLazr AL5010, Руководство по линейке продуктов

Результаты поиска

Содержание AccuLazr AL5010

Отзывы:

Похожие инструкции для AccuLazr AL5010

Бренды по названию

Популярные бренды