Datakom DKM-046, Руководство пользователя

Страница: 5 / 34

DKM-046 User Manual V-1.0
5
Before installation:

Read the user manual carefully, determine the correct connection diagram.

Install the unit to the DIN rail.

Make electrical connections with plugs removed from sockets, then place plugs to their sockets.

Be sure that adequate cooling is provided.

Be sure that the temperature of the environment will not exceed the maximum operating temperature in any
case.

Be sure that the unit is not subject to water spill.
Below conditions may damage the device:

Incorrect connections.

Incorrect power supply voltage.

Connecting or removing data terminals when the unit is powered-up.

Connecting or removing sensors when the unit is powered-up.

High voltage applied to communication ports.

Overload or short-circuit at relay outputs.

Excessive vibration, direct installation on vibrating parts.
Below conditions may cause abnormal operation:

Power supply voltage below minimum acceptable level.

Power supply frequency outside acceptable limits.
1. INSTALLATION INSTRUCTIONS