Datakom DKM-046, Руководство пользователя

Страница: 11 / 34

DKM-046 User Manual V-1.0
11
In order to offer the maximum flexibility to the customer, the module has several
programmable parameters.

Device configurations
 Default screen configuration

Measurement configurations

Alarm reset

Alarm high/low limit adjustments

Input/Output Configurations

Relay configuration
 Alarm delays
 Modbus configuration

Unit Calibration

Modbus configuration

Return to factory settings
In order to enable the programming menu,
hold both MENU buttons pressed for 2 seconds.
In order to exit programming menu,
hold both MENU buttons pressed for 2 seconds.
If no button is pressed during 1 minute, then the unit will
automatically close the programming mode.
Parameters may be scrolled with these buttons.
When SET button is pressed:

The parameter value is displayed

The value on the screen is recorded and the next
parameter is displayed.
Parameter values are modified with UP and DOWN Menu
buttons. If the button is held pressed, the the value will change
with larger steps.
After adjusting the parameter value this button saves the value
on the screen and switched to the next parameter.
4. PROGRAMMING
4.1 ENTERING THE PROGRAMMING MODE