DataCard CR805, Инструкция по установке и руководство администратора

Страница: 150 / 152

A-18 CLM Laminator
The following laminator supplies are available. Most are available for a full card, smart card, or
magnetic stripe card.

Clear DuraGard®, 1.0 mil, up to 300 images/roll

Holographic DuraGard®, 1.0 mil, Random, up to 300 images/roll

Holographic DuraGard® Registered, 1.0 mil, up to 300 images/roll
Contact your authorized dealer for a complete list of available overlays.
Overlay Storage Guidelines

Store overlay material in the original package until you load it in the laminator. Keep the
original packaging closed until you are ready to use the overlay.

The overlay maintains its quality for about one year. For optimum card quality, purchase and
store quantities of material that can be used within one year.

Overlay material might require secure storage and tracking. Follow your organization’s policy
for storing and tracking the supplies used to make cards.

Store the overlay in a location away from direct sunlight, with a temperature between 50°
and 80°F (10° and 27°C). A range of 30% to 70% humidity is recommended.

Install supply rolls at room temperature. If supplies are stored in an environment that is
cooler than the printer environment, allow supplies to reach room temperature before you
use them.

If the printer will not be used for an extended period, remove supplies from the printer and
store them with new supplies.