DataCard CR805, Инструкция по установке и руководство администратора

Страница: 21 / 152

CR805 Retransfer Card Printer Installation and Administrator’s Guide 5
Clearance Requirements
The following measurements show the printer dimensions when the system access doors are
open and the power cord is connected. We recommend that you provide at least 3 inches
(76.2 mm) of additional clearance around the system to maintain access to the power cord
and data cables, and to allow you to load and remove cards and supplies.
Single-Hopper Printer
Multi-Hopper Printer
Options, such as a large output hopper, change the dimensions of the printer.
Additional clearance is required when using these options.
26.4 in
668 mm
28.2 in
717 mm
15.6 in
397 mm
14.3 in
363 mm
12.1 in
306 mm
28.8 in
732 mm
14.6 in
371 mm
11.7 in
298 mm
35.2 in
893 mm
16.2 in
411 mm
10.0 in
254 mm