Data Flow Systems TCU800, Быстрый старт

Страница: 21 / 25

20
Adjust screen contrast for
daytime/nighttime viewing Swipe to the Settings page. Select TCU Settings. Tap the
entry to the right of Theme Mode and select either Day Mode
or Night Mode.
Maintenance
The TCU itself is designed for a minimum amount of maintenance. It is more important to maintain the
station and the components connected to the TCU.
When cleaning the TCU's front panel, use a microfiber cloth with LCD screen cleaner (similar to that which
you would use for a computer monitor or television screen). Do not use solvents to clean the TCU's front
panel.
Recommended Backup Batteries
•
12V, 7.0Ah Rechargeable Battery (Part No. DFS-00363-008-01)
• 12V, 2.6Ah Rechargeable Battery (Part No. DFS-00363-008-02)
The TCU800 includes one replaceable fuse. If this fuse should fail, replace it with a new identical one
(0312002.MXP) (Part No. DFS-040-0079).
Replacement Parts
Parts should only be replaced with parts recommended and approved by Data Flow Systems. Placing
unapproved parts in the TCU voids the safety certification. See the Return Authorization (RA) Procedure
(next section) for instructions on obtaining replacement parts.
Return Authorization (RA) Procedure
In the event that a unit fails, during or after the warranty period, it may be returned to Data Flow Systems
to be repaired or replaced.
All RA's will be subject to standard shipping and handling charges. Minimum handling charges will be
assessed in most cases for work such as Radio Tuning, Backplanes, "No Problem Found," and other minor
repairs. Handling charges will be waved on warranty equipment. Standard shipping charges will be based
on UPS ground, please advise if other arrangements are needed (UPS Red, FedEx, Pickup, Freight…). The
standard cost of repairs and shipping charges can be obtained by contacting our RA Department by phone
or e-mail.
STEP 1: Replace the failed unit with a spare one of the same type, if available.
STEP 2: Contact Data Flow Systems Inc. to receive an RA# via:
• Email DFS at rma@dataflowsys.com.
• Call DFS at 321-259-5009 ext. 1117 during normal operating hours.
The following information must be provided.
•
Customer/Utility Name and Ship to Address
•
Contact Name and Phone Number
•
Products to be returned and Serial Numbers
• Detailed description of failure
• PO#