Data Domain DD400 Series Скачать руководство пользователя страница 242

Страница: 242 / 300

204

DD400 Series Restorer User Guide

reset all

Sets all autosupport parameters to the factory defaults.

Administrative users only.

reset schedule

Sets the weekly system report schedule to the default (daily 0300).

Administrative users only.

reset support-list

Sets the email list to the factory defaults. Administrative users

only.

send

Test-run the system report and email the results to all addresses on

the autosupport list or to one specified address. After adding

addresses to the email list, always use this operation to test the

address.

set schedule

Set the verbose system report to run at a given frequency and a

given time. The schedule operation can specify a day (one or

two numerals) or on a day of the week (three letters) at a specific

time (0000). Administrative users only.

The

daily

and

never

periods do not take a <

day

> qualifier. The

weekly

period with a <

day

> qualifier or the <

day

> qualifier without

weekly

both run the command once a week. The

never

period

turns off the system report.

The <

day

> qualifier is three letters (such as "mon" for Monday)

when used with the

weekly

period and when used alone with

the required

time

entry. Use a dash (-) between days for a

range of days. For example:

tue-fri

.The <

day

> qualifier is a

day-of-the-month, from 1 to 31, when used with

monthly

time

> is 24-hour military time. 2400 is not a valid time.

"mon 0000" is midnight between Sunday night and Monday

morning.

show all

Display all autosupport parameters.

show history

Display the event history file, which includes the date for each

autosupport report. Use the up and down arrow keys to move

through the log. Use the

key to exit. Enter a slash character (/)

and a pattern to search for and highlight lines of particular

interest.

show schedule

Displays the system report schedule.

Содержание DD400 Series













































































































































































































































































































Результаты поиска

Содержание DD400 Series

Отзывы:

Похожие инструкции для DD400 Series

Бренды по названию

Популярные бренды

Data Domain DD400 Series, Руководство пользователя

Результаты поиска

Содержание DD400 Series

Отзывы:

Похожие инструкции для DD400 Series

Бренды по названию

Популярные бренды