![background image](http://html.mh-extra.com/html/data-domain/dd400-series/dd400-series_user-manual_511144267.webp)
229
ipaddr
Set the IP address for the interface. If the interface already
uses DHCP, the IP address for the interface changes, but all
other parameters received through DHCP remain the same.
netmask
Set the netmask for the interface. Use the standard form of IP
address.
up
Enable the interface.
down
Disable the interface.
mtu
Set the maximum transfer unit size. Supported values are from
256 to 9180. The standard size for 10 Base-T and 100 Base-T
networks is 1500. The standard size for gigabit networks is
9180. The default is 1500.
dhcp yes
Enable the use of a DHCP server for the interface. Enabling DHCP
for an interface momentarily brings down the interface while
DHCP allocates a dynamic IP address. DHCP-supplied parameters
for an interface are: IP address, netmask, DNS server list,
gateway, domainname, and host name (if the interface does not
already have a hostname).
dhcp no
Disable the use of a DHCP server for the interface.
autoneg
Let the network interface card autonegotiate line speed and
duplex setting.
duplex
Set the line use to either
full
or
half
duplex.
speed
Set the line speed to 10 Base-T, 100 Base-T, or 1000 Base-T
(Gigabit).
disable
Disable an Ethernet interface. Administrative users only.
enable
Enable an Ethernet interface. Administrative users only.
hosts add
Associate an IP address with a host name. The host name can be
a fully-qualified domain name, or an alias and a fully-qualified
domain name enclosed in double quotes. The entry is added to
the
/etc/hosts
file. Administrative users only.
Содержание DD400 Series
