Reset Disk Performance Statistics
98
DD400 Series Restorer User Guide
Reset Disk Performance Statistics
To reset disk performance statistics to zero, use the
disk reset performance
operation. See
“Display Disk Performance Details” on page 97 for displaying disk statistics.
disk reset performance
Display Disk Reliability Details
Disk reliability information details the hardware state of each disk. The information is generally for
the use of Data Domain support staff when troubleshooting.
Disk
is the disk ID number, from 1 (one) to 15.
The
ATA Bus Soft Err
column shows uncorrected raw UDMA CRC errors.
The
Command Timeouts
counts times that the operating system SCSI midlayer registers that a
command timed out.
Command Faults
columns shows counts of commands that the operating system SCSI midlayer
registers as leading to read failures, write failures, and other command failures.
The
Drive Soft Err
columns show the number of errors corrected by the disk’s software error
correction control. The
Soft
column is the number of off track errors. The
Err
column is the number
of soft ECC errors.
Awaiting Realloc
shows the number of sectors on a drive that have returned at least one error, but
that are not yet confirmed as bad.
Already Realloc
indicates the end of the useful disk lifetime when the number of reallocated sectors
approaches the vendor-specific limit. The limit is 2000 for Western digital disks and 2000 for
Hitachi disks. Use the
disk show config
command to display the disk vendor.
Temp
shows the current temperature of each disk in degrees centigrade. The allowable temperature
range for disks is from 5 degrees centigrade to 58 degrees centigrade.
Display
Use the
disk show reliability data
operation or click
Disks
in the left panel of the DDR
Manager to see the reliability statistics.
disk show reliability-data
The display is similar to the following:
#
disk show reliability-data
Disk ATA Bus Command Command Drive Awaiting Already Temp
Soft Err Timeouts Faults Soft Err Realloc Realloc
------ -------- -------- ------- -------- ------- ------- -----
disk1 0 0 0/0/0 6/0 0 0 28 C
Содержание DD400 Series
