Data Domain DD400 Series Скачать руководство пользователя страница 119

Страница: 119 / 300

Chapter 9: File System Management

Statistics and Basic Operations

Display File System Space Utilization

The display shows the amount of space available for and used by restorer file system components.

•

The

/ddvar

line gives a rough idea of the amount of space used by and available to the log and

core files. Remove old logs and core files to free space in this area.

•

The

Pre-compression

line shows the amount of virtual data stored on the restorer. Virtual data

is the amount of data sent to the restorer from backup servers. Do not expect the amount shown
in the

Pre-compression

line to be the same as the amount displayed with the

filesys show

compression

command,

Original Bytes

line, which includes system overhead.

•

The

Data

line shows the actual physical space used by and available for data storage. Warning

messages go to the system log and an email alert is generated when the

Use%

figure reaches

90%, 95%, and 100%. At 100%, the restorer accepts no more data from backup servers. You
must run a

filesys clean

operation to reclaim disk space. If

Use%

is always high, use the

filesys clean show-schedule

command to see how often the operation runs

automatically, then use

filesys clean schedule

to run the operation more often.

Also consider reducing the data retention period or splitting off a portion of the backup data to
another restorer.

•

The

If 100% cleaned

line is an estimate of actual physical space used, and physical space

available for data storage if you run the

filesys clean start all

operation to clean

100% of the file system. The estimate is based on the most recent

clean

operation. On a

replica, no estimate appears.

•

The

Meta Data

line tracks space used for the internal file descriptions that the restorer creates

for all stored files. Warning messages go to the system log and an email alert is generated
when the

Use%

figure reaches 90%, 95%, and 100%. At 100%, the restorer accepts no more

data from backup servers. From the backup server, you must expire or purge backup images to
create free space for meta data.

•

The

Index

line tracks space used for internal restorer operations. Warning messages go to the

system log and an email alert is generated when the

Use%

figure reaches 90%, 95%, and

100%. At 100%, the restorer accepts no more data from backup servers. To create free space
for the index:

From the backup server, expire or purge backup images.

On the restorer, run the

filesys clean start

operation.

•

The

Estimated compression ratio

line gives a rough idea of data compression efficiency. The

estimate is based on the most recent

clean

operation and changes if the compressibility of

data sent to the restorer changes. Note that the compression calculation includes the metadata
and index space as part of the total storage space. On a replica, no estimate appears.

•

The

Estimate based on

line displays the date for the most recent clean operation. The date is in

the format

YYYY/MM/DD

Содержание DD400 Series













































































































































































































































































































Результаты поиска

Содержание DD400 Series

Отзывы:

Похожие инструкции для DD400 Series

Бренды по названию

Популярные бренды

Data Domain DD400 Series, Руководство пользователя

Результаты поиска

Содержание DD400 Series

Отзывы:

Похожие инструкции для DD400 Series

Бренды по названию

Популярные бренды