Data Domain DD400 Series Скачать руководство пользователя страница 131

Страница: 131 / 300

Chapter 10: Disk Management

Display Disk Type and Capacity Information

RAID:

0 drives have "failed"

RAID:

1 drive is “hot spare(s)”

RAID:

0 drives undergoing “reconstruction”

RAID:

0 drives are “not in use”

RAID:

0 drives are “missing/absent”

Operational:

14 drives operating normally.

Operational:

0 drives absent/missing.

Operational:

1 drive reports excessive temperature

Performance:

Cumulative

1.338 MB/s, 0% busy

Display Disk Type and Capacity Information

The display of disk ID, manufacturer, model, serial number, and capacity of each disk in a restorer
has the columns:

•

Disk

is the disk ID number, from 1 (one) to 15.

•

Manufacturer

gives the brand name of the disk.

•

Model

is the manufacturer’s model number.

•

Firmware

is the firmware revision on each disk.

•

Serial No.

is the manufacturer’s serial number for the disk.

•

Capacity

is the data storage capacity of the disk when used in a restorer. The Data Domain

convention for computing disk space defines one gigabyte as 2

bytes, giving a different disk

capacity than the manufacturer’s rating.

The display for a restorer using external storage has the columns:

•

Disk

displays each LUN accessed by the restorer as a disk.

•

LUN

is the LUN number given to a LUN on the external storage system.

•

Port WWN

is the world-wide number of the port on the external storage system through which

data is sent to the restorer.

•

Manufacturer/Model

includes a label that identifies the manufacturer. The display may include

a model ID or RAID type or other information depending on the vendor string sent by the
external storage system.

•

Firmware

is the firmware level used by the external storage controller.

•

Serial No.

is the serial number from the external storage system for a volume that is sent to the

restorer.

•

Capacity

is the amount of data in a volume sent to the restorer.

Содержание DD400 Series













































































































































































































































































































Результаты поиска

Содержание DD400 Series

Отзывы:

Похожие инструкции для DD400 Series

Бренды по названию

Популярные бренды

Data Domain DD400 Series, Руководство пользователя

Результаты поиска

Содержание DD400 Series

Отзывы:

Похожие инструкции для DD400 Series

Бренды по названию

Популярные бренды