darda BP2, Руководство по эксплуатации продукта, Страница: 70 / 77

7 Maintenance / Cleaning
46 OM Hydraulic aggregate, Version 1.0 01/2013
7.2 Cleaning
Only clean the device after shutting it down beforehand!
Before starting to clean, read the chapter about the shut-down procedure.
(

5.2 Shut-down Procedure)
At the engine/motor end, the device must not be cleaned directly with a high-
pressure jet of water.
Fig. 7-1
The following components must not be cleaned with a high-pressure cleaner.
– Drive motor
– Electric components and connections
– Pneumatic filter and silencer
These components should be cleaned dry.