darda BP2, Руководство по эксплуатации продукта, Страница: 43 / 77

2 Safety Instructions
OM Hydraulic Aggregate, Version 1.0 01/2013 19
2.5.6 Hazards caused by concealed dangers / residual risks
When working with the device, there are unforeseeable residual risks that
can only be prevented by systematic work planning, working methods that
take account of possible risks, experience, etc.
The following list is intended to draw your attention to some possible risks:
– When demolishing supporting walls, steel beams or supporting pillars,
building areas may collapse.
 Before starting work, discuss the procedure with the person in charge of
the site.
 Wear appropriate personal protective gear for all work.
2.6 Hazards caused by Operating Materials
Hazardous materials must be monitored at all times. Any new knowledge gained in
this way is incorporated in new instructions (safety data sheets), requirements for
safety gear and parameters for exposure volumes and times. The operator must
therefore continually keep protective measures up-to-date.
The suggestions relating to use and handling of materials apply only in direct rela-
tion to the product described and in addition to the corresponding safety data
sheets.
External requirements resulting from the ambient conditions at the place of use, or
other products or mixes with other substances, preparations or products, are not
taken into account.
These suggestions do not exempt the operator in any way from his duties under
health and safety law relating to the health and safety of his employees.
The protective measures must be designed in line with the actual risks on site re-
sulting from the conditions of use, all substances, preparations and products used,
the work processes and the ambient conditions.
The operating materials are hazardous substances. Special requirements are in
place to protect employees, environment and property when handling, storing,
transporting and using these substances. These requirements are listed in the
current safety data sheet (SDS).
The operator is obliged to put corresponding measures into place.