darda BP2, Руководство по эксплуатации продукта, Страница: 11 / 77

1 Introduction
IM Hydraulic Aggregate 2, Version 1.0 01/2013 5
1.6 Intended Use
The hydraulic aggregate from
Darda GmbH
with pressure relief valve is designed
solely for driving the Darda GmbH devices specified for it.
The hydraulic aggregate is only intended
–
for use within fixed buildings,
–
for use outdoors,
–
for mobile use,
–
for commercial use,
–
for connecting to public supply networks,
–
for use by persons aged 14 and over,
–
for use by laymen.
All possible forms of device use that are not expressly described under in-
tended use and the conditions thereof are not permitted.
The operator and maintenance staff must have sufficient knowledge of one official
language.
The device may be used in the following places and surroundings:
–
demolition sites within and outside fixed buildings.
–
site traffic routes when used by construction machinery and vehicles directly at
the installation site.
–
environments with high levels of dust and splash water.
Interface:
The device's hydraulic connection takes the form of hoses with direct screw unions
or quick-release couplings.
The nominal hydraulic rating is 50 MPa (500 bar), 1.6 l/min.