darda BP2, Руководство по эксплуатации продукта, Страница: 47 / 77

2 Safety Instructions
OM Hydraulic Aggregate, Version 1.0 01/2013 23
2.9 Personal Protective Gear
When working on / with the device, wear the personal protective gear that the
relevant safety instructions require.
You may not work with the device without personal protective gear.
The recommendations for personal protective gear only apply to the de-
scribed product. External requirements resulting from the ambient condi-
tions at the place of use or other products or linking with other products are
not taken into account.
These suggestions do not exempt the operator in any way from his duties
under health and safety law relating to the health and safety of his
employees.
If the personal protective gear is damaged, it may no longer be used and
must be replaced by intact gear.
The personal protective gear must be checked regularly at intervals appro-
priate to its use.
If subject to chemical or thermal loads, the personal protective gear may be
damaged without this being obvious. Should such risks apply, the personal
protective gear must be checked, at appropriate intervals or if you suspect
damage, by appropriately qualified persons.
2.9.1 Class S1 safety shoes
When performing tasks such as
– transport
– commissioning
– operation
– maintenance, cleaning, repairing
wear safety shoes in class S1 according to IEC 61310.
2.9.2 Protective gloves
Wear protective gloves offering class 1 protection from contact heat during work.