darda BP2, Руководство по эксплуатации продукта, Страница: 59 / 77

5 Commissioning / Shut-down Procedure
OM Hydraulic Aggregate, Version 1.0 01/2013 35
5 Commissioning / Shut-down Procedure
5.1 Commissioning / Operation
We call your attention expressly to the fact that the conversion and the
hydraulic installation of the device may only be carried out by trained per-
sonnel with a profound mechanical and hydraulic knowledge!
(

2.8 Safety Instructions for Commissioning)
 Before commissioning, ensure that the device is in a secure position.
 During operation, the device's own vibrations may cause it to move so it should
be fastened down appropriately.
 During operation, the device must not be covered.
 When using a hydraulic aggregate with a pneumatic motor, the shut-off valve
(ball cock) should be opened slowly.
 A hydraulically driven device may only be connected to the hydraulic aggregate
when switched off.
 The control valve of the hydraulically driven device must be in the zero position.
 The control valve of the
hydraulically driven device
must be in the zero position
in order to start the motor/engine.
 First connect the return and then the feed.
 Before commissioning, always check the oil level. Place the device on a level
surface.
Oil level:
Minimum level: the sight glass is 1/2 filled with oil.
Maximum level: the sight glass is 2/3 filled with oil.