MAINTENANCE
INFORMATION
DIESEL BURNER CLEANING
The burner should be cleaned by authorised personnel, strictly complying with the user manual of
the burner.
MAINTENANCE
INFORMATION
ELECTROVENTILATOR CLEANING
After removing the necessary panels, clean the component using only a jet of compressed air.
Type 3 features a transmission with belts and pulleys; periodically check the tension of the belts.
The belts must be tensioned enough so that they do not slide on the pulley. Excessively
tensioned belts may cause the bearings and/or shaft to break
MAINTENANCE
INFORMATION
THERMOSTAT SAFETY CHECK
Check the functionality of the safety thermostat at least quarterly. Simulate its intervention and it
should be verified that the burner goes out.
MAINTENANCE
INFORMATION
SECURITY CONTROL
Periodically check the operation of all the safety devices of the unit, by simulating their intervention
and making sure that the unit stops safely.
MAINTENANCE
INFORMATION
CHECKING ELECTRICAL CONNECTIONS
Periodically check the correct tightening of all electrical connections.
MAINTENANCE
INFORMATION
JACKET CLEANING
With compressed air and moistened cloth, clean all the inner and outer surfaces of the jacket. It is
forbidden to use solvents and / or abrasives.
MAINTENANCE
INFORMATION
FLUE GAS ANALYSIS
\
Periodically carry out a combustion control-analysis, including the Bacharach degree of opacity
Pa
ge.
27
