INSTALLATION
INFORMATION
INSTALLATION PLACE
The location for the unit must be determined by the system designer or a competent person and it
must take into account the technical requirements and the standards and regulations in force;
generally, special permissions need to be obtained. (e.g.: regulations concerning zoning,
architecture, fires, environmental pollution, noise emission, etc.).
It is therefore advisable, before installing the unit, to request and obtain the necessary permissions.
To properly install the machine, bear in mind that the heaters should:
▪
be placed on a flat surface, capable of bearing its weight;
▪
be supported over the entire perimeter of the lower base;
▪
be placed on a surface whose deflection and strength is such that it can prevent vibrations from
reaching the area underneath;
▪
respect the distances in order to allow for a correct flow of air and normal cleaning and
maintenance operations;
▪
maintain the safety distances from flammable material;
▪
be placed close to a flue chimney;
▪
be able to be connected to the fuel source
▪
be close to an electrical socket;
▪
allow for easy maintenance and inspections;
▪
be fitted with the ventilation openings required by the relevant regulations.
It is forbidden to install it:
▪
in places where there are aggressive atmospheres;
▪
in cramped places where the sound level of the hot air generator can be increased by
reflections or echoes;
▪
in corners where leaves could accumulate or where other objects could clog the air passage
and reduce the generator efficiency;
▪
in pressurised places;
▪
in depressurised places;
▪
outdoors, if not provided with a protection against bad weather conditions.
INSTALLATION
INFORMATION
SAFETY AREA
The unit must be easily and safely accessible without the need for special equipment
(ladders, mobile platforms, etc.)
. Around the unit it is also necessary to respect the minimum
distances to allow normal control and/or maintenance operations and not to create obstacles to the
flow of air.
Pa
ge
.
14
