Dantherm DanX 1 XD, Руководство пользователя

Страница: 37 / 60

4. CONTROLS
35
4.10 WEB operator interface
The MVC WEB controller is operated via a standard web browser. By default, an integrated
web server provides all operation pages for a full browser-based operation. Through the
consequent use of software standards, any PC platform can be used as an operator
interface (client). Other than the operating system and Internet Explorer, Chrome or Firefox,
no software needs to be installed on the client PCs. Any MVC WEB controller on the network
can be accessed via the browser-based MVC Web Interface, both locally and remotely. The
local access is normally only used to change the LAN IP address of the controller and for
service reasons. The costumer access is normally remotely over the LAN network.
4.10.1 Local access
To locally connect to the MVC WEB controller via USB interface, an USB cable of type B
standard has to be used. The USB connection / local access type is mandatory for the initial
setup of the controller and the LAN IP address.
For access via the USB connection, the controller has a factory default IP address
192.168.255.241 and Network Mask 255.255.255.0 .
To connect your computer locally for the first time, do the following:
•
Copy the directory with the MVC WEB drivers on your computer.
•
Connected your computer and the MVC WEB controller with the USB cable.
•
Power up the MVC WEB controller. Depending on your Windows system your
computer will automatically search for a driver, or you have to install the driver
manually.
•
Open now the browser on your computer. Enter the IP address for the USB
connection which is always
192.168.255.241 and you will see the following picture and
be ready to enter the controller.