Dantherm DanX 1 XD, Руководство пользователя

Страница: 41 / 60

4. CONTROLS
39
4.10.5 Operation
When opening the WEB controller through a browser the first page you will always see
shows the flow diagram of the unit with all the important values. Secondly you can access
set points, the time program and stop the unit from this page.
The controller selection pane on the left displays the application of the current controller in a
hierarchical tree structure. The alarm indicator icon next to the drop-down listbox indicates
whether alarms exist (red) or not (green).
In the tree structure the following most important points can be chosen:
•
BC1000 / Fast Access Lists: Here you find the Setpoint and Unit Status menu.
•
Advanced / Plants / AHU01 / Fast Access Lists: Here you find the Unit Configuration
list, where you configure the unit for your needs.
•
Advanced / Plants / AHU01 / Schedules: Here you find the Timeprogram where you
can set the units start/stop times and night/day running times.
•
Advanced / Plants / Datapoints: Here you find all data points of the program and in
SystemAdmin mode you can set these from automatic to manual.
•
Advanced / Plants / Alarms: Here you find the alarm buffer for the controller with all
recorded alarms.
•
Advanced / System Settings / Clock: Here you set the time and date.
•
Advanced / System Settings / Communication: Here you set the IP address for the
LAN network. Secondly you can setup e-mails for different users which will be send in
the case of an alarm.
•
Advanced / System Settings / User Administration: Here you change user passwords,
create new user and configure the access level for each user.
For
further and deeper information’s, there is an English Honeywell user guide available from
Dantherms FTP server.