Danfoss VLT Midi Drive FC 280, Инструкция по эксплуатации

Страница: 26 / 68

5.3.4 Main Menu on LCP
The Main Menu gives access to all parameters.
1. To enter Main Menu , press [Menu] until the
indicator in the display is placed above Main
Menu .
2.
[
▲
] [
▼
]: Browse through the parameter groups.
3. Press [OK] to select a parameter group.
4.
[
▲
] [
▼
]: Browse through the parameters in the
specific group.
5. Press [OK] to select the parameter.
6.
[
►
] and [
▲
] [
▼
]: Set/change the parameter value.
7. Press [OK] to accept the value.
8. To exit, press either [Back] twice (or three times
for array parameters) to enter
Main Menu , or
press [Menu] once to enter Status .
See Figure 5.5 , Figure 5.6 and Figure 5.7 for the principles of
changing the value of continuous, enumerated and array
parameters, respectively. The actions in the figures are
described in
Table 5.5 , Table 5.6 and Table 5.7 .
130BC446.10
Setup 1
Setup 1
Setup 1
Setup 1
Setup 1
Setup 1
Setup 1
Setup 1
1
2
3
4
5
6
7
10
11
12
OK
OK
Back
8
Back
Setup 1
2 x
+
OK
9
OK
Figure 5.5 Main Menu Interactions - Continuous Parameters
Commissioning
VLT
®
Midi Drive FC 280
24 Danfoss A/S © 11/2015 All rights reserved. MG07A122
5 5