6.1.9 Parameter Selection
In main menu mode, the parameters are divided into groups. Select a
parameter group using the navigation keys.
The following parameter groups are accessible:
Group no.
Parameter group:
0
Operation/Display
1
Load/Motor
2
Brakes
3
References/Ramps
4
Limits/Warnings
5
Digital In/Out
6
Analog In/Out
8
Comm. and Options
9
Profibus
10
CAN Fieldbus
11
LonWorks
13
Smart Logic
14
Special Functions
15
Drive Information
16
Data Readouts
18
Data Readouts 2
20
Drive Closed-loop
21
Ext. Closed-loop
22
Application Functions
23
Time-based Functions
24
Fire Mode
25
Cascade Controller
26
Analog I/O Option MCB 109
Table 6.3: Parameter groups.
After selecting a parameter group, choose a parameter by means of the
navigation keys.
The middle section on the GLCP display shows the parameter number and
name, as well as the selected parameter value.
Figure 6.10: Display example.
VLT AQUA Low Harmonic Drive Instruction
Manual
6 How to Program the Low Harmonic Drive
MG.20.T1.22 - VLT
®
is a registered Danfoss trademark
6-7
6
