
[1682]
Serial com. bus REF 1
Main reference value sent with control word via the serial communications network, e.g., from the
BMS, PLC or other master controller.
[1684]
Comm. Option STW
Extended serial communication option status word.
[1685]
ADF Port CTW 1
Control word (CTW) received from the bus master.
[1686]
AFD Port REF 1
Status word (STW) sent to the bus master.
[1690]
Alarm Word
One or more alarms in a Hex code (used for serial communications)
[1691]
Alarm Word 2
One or more alarms in a Hex code (used for serial communications)
[1692]
Warning Word
One or more warnings in a Hex code (used for serial communications)
[1693]
Warning Word 2
One or more warnings in a Hex code (used for serial communications)
[1694]
Ext. Status Word
One or more status conditions in a Hex code (used for serial communications)
[1695]
Ext. Status Word 2
One or more status conditions in a Hex code (used for serial communications)
[1696]
Maintenance Word
The bits reflect the status for the preventive maintenance events programmed in parameter group
23-1*
[1830]
Analog Input X42/1
Shows the value of the signal applied to terminal X42/1 on the Analog I/O card.
[1831]
Analog Input X42/3
Shows the value of the signal applied to terminal X42/3 on the Analog I/O card.
[1832]
Analog Input X42/5
Shows the value of the signal applied to terminal X42/5 on the Analog I/O card.
[1833]
Analog Out X42/7 [V]
Shows the value of the signal applied to terminal X42/7 on the Analog I/O card.
[1834]
Analog Out X42/9 [V]
Shows the value of the signal applied to terminal X42/9 on the Analog I/O card.
[1835]
Analog Out X42/11 [V]
Shows the value of the signal applied to terminal X42/11 on the Analog I/O card.
[2117]
Ext. 1 Reference [Unit]
The value of the reference for extended Closed-loop Controller 1
[2118]
Ext. 1 Feedback [Unit]
The value of the feedback signal for extended Closed-loop Controller 1
[2119]
Ext. 1 Output [%]
The value of the output from extended Closed-loop Controller 1
[2137]
Ext. 2 Reference [Unit]
The value of the reference for extended Closed-loop Controller 2
[2138]
Ext. 2 Feedback [Unit]
The value of the feedback signal for extended Closed-loop Controller 2
[2139]
Ext. 2 Output [%]
The value of the output from extended Closed-loop Controller 2
[2157]
Ext. 3 Reference [Unit]
The value of the reference for extended Closed-loop Controller 3
[2158]
Ext. 3 Feedback [Unit]
The value of the feedback signal for extended Closed-loop Controller 3
[2159]
Ext. Output [%]
The value of the output from extended Closed-loop Controller 3
[2230]
No-Flow Power
The calculated No-Flow Power for the actual operating speed
[2580]
Cascade Status
Status for the operation of the cascade controller
[2581]
Pump Status
Status for the operation of each individual pump controlled by the cascade controller
[2791]
Cascade Reference
Reference output for use with follower drives.
[2792]
% Of Total Capacity
Readout parameter to show the system operating point as a % capacity of total system capacity.
[2793]
Cascade Option Status
Readout parameter to show the status of the cascade system.
0-21 Display Line 1.2 Small
Option:
Function:
Select a variable for display in line 1, middle position.
[1662] *
Analog input 53
The options are the same as those listed for par. 0-20
Display Line 1.1 Small
.
0-22 Display Line 1.3 Small
Option:
Function:
Select a variable for display in line 1, right position.
[1614] *
Motor Current
The options are the same as those listed for par. 0-20
Display Line 1.1 Small
.
6 How to Program the Low Harmonic Drive
VLT AQUA Low Harmonic Drive Instruction
Manual
6-12
MG.20.T1.22 - VLT
®
is a registered Danfoss trademark
6