Danfoss VACON NXP FI10, Руководство по эксплуатации

Страница: 46 / 172

A B
e
3
0
b
g
0
1
5
.1
0
DIN1
+24V
GND
DIN2
DIN3
CMA
+24V
GND
DIN1
DIN2
DIN3
CMA
A Positive logic (+24 V is the active signal) = the input is active
when the switch is closed.
B Negative logic (0 V is the active signal) = the input is active
when the switch is closed. Set the jumper X3 to the position
'CMA/CMB isolated from ground'.
Illustration 18: Positive/Negative Logic
7.3.2.2 Jumper Selections on the OPTA1 Basic Board
The functions of the AC drive can be changed to make them better agree with local requirements. To do it, change some positions for
the jumpers on the OPTA1 board. The positions of the jumpers set the signal type of analog and digital inputs. Changing the AI/AO
signal contents requires also a change in the related board parameter in menu M7.
On the A1 basic board, there are 4 jumper blocks: X1, X2, X3, and X6. Each jumper block contains 8 pins and 2 jumpers. See the possible
jumper selections in
illustration 19 .
X6
X2
X1
X3
e
3
0
b
g
0
1
6
.1
0
X6 X2 X1
A B C D A B C D A B C D
X3
Illustration 19: Jumper Blocks on OPTA1
Control Unit
Operating Guide | VACON® NXI Inverters FI9-FI14
AQ304441431479en-000101 / DPD00909
46 | Danfoss A/S © 2019.11