User Guide
MES 1003 WMS
Doc no. 100837-MAN – Rev. E1 – Rev. date 2022-10
© Danfoss IXA A/S | Page 14
1-** Event log
1-1* Event log show
(view only Event Details)
- select 1-11 Event log
(options List of Log IDs. If there are no Events, the
list is empty.)
1-2* Event log status
- select 1-21 Status
(options Enabled, Disabled)
1-3* Help
1-4* Reset Alarm
- select Reset Alarm
See
Appendix 1 – Parameter Overview
2-** Settings
2-1* Auto start
- select 2-11 Auto start status
2-2* Set time and date
- select 2-21 Set Date
2-3* PAH Range
- select 2-31 Set Range
(options 0-50 ug/l, 0-500 ug/l)
2-4* Display PAH
- select 2-41 Display PAH
Auto start: When Auto start is disabled on the WMS, the system enters Standby mode when the system is turned on or restarted.
If Auto-start is enabled, the systems immediately starts Sensing mode.
See
Appendix 1 – Parameter Overview
