User Guide
MES 1003 WMS
Doc no. 100837-MAN – Rev. E1 – Rev. date 2022-10
© Danfoss IXA A/S | Page 29
5.
Service and maintenance
5.1.
General
When performing maintenance or service on the Washwater Monitoring System spilling may occur. The spilling can both
be sea water, scrubber discharge water and closed loop scrubber water.
During maintenance spilling can occur. The pH level of the content being spilled can potentially be rather acidic. Please
make sure to use proper protection for eyes and skin to avoid any direct contact.
If spilling occurs inside the WAU or SU cabinets, please soak up the spilled water and make sure that the cabinets are left
dry and clean.
5.2.
Maintenance
The Washwater Monitoring System is an easy to maintain product.
Maintenance and inspection shall be carried out according to the Table 20.
Personnel conducting maintenance must be:
Trained and authorized in general safety rules for work on electrical equipment.
Familiar with local requirements, rules, and regulations for the installation.
