Temporarily install the top duct section as
shown above. Use the top duct cover piece to
mark the enclosure top for the opening.
Alternatively, the mounting template (sup-
plied drawing) can be used to make the en-
closure cutout.
3.40: Rittal enclosure top with cut-out
The standard Rittal enclosure top is cut. The gas-
ket is not used on the cut-out. The gasket is part
of the duct work.
3.41: The gasket folds over the edge to form a
seal between the duct and the top vented cover.
3.42: Top duct installed
3.43: The gasket applied to both sides of the ad-
justable frequency drive bracket and duct vented-
top cover.
3.44: Top duct ready to be installed on the ad-
justable frequency drive
VLT
®
HVAC DRIVE High Power
Instruction Manual
3. How to Install
MG.11.F1.22 - VLT
®
is a registered Danfoss trademark.
41
3
Содержание FC 100 Series
Страница 131: ...7 Annexes VLT HVAC DRIVE High Power Instruction Manual 7 Annexes MG 11 F1 22 VLT is a registered Danfoss trademark 131 7...
Страница 133: ...VLT HVAC DRIVE High Power Instruction Manual 7 Annexes MG 11 F1 22 VLT is a registered Danfoss trademark 133 7...
Страница 134: ...7 Annexes VLT HVAC DRIVE High Power Instruction Manual 134 MG 11 F1 22 VLT is a registered Danfoss trademark 7...
Страница 135: ...VLT HVAC DRIVE High Power Instruction Manual 7 Annexes MG 11 F1 22 VLT is a registered Danfoss trademark 135 7...