![background image](http://html1.mh-extra.com/html/danfoss/fc-100-series/fc-100-series_instruction-manual_3420927037.webp)
Ordering Information
Rittal TS-8 Enclo-
sure
Frame D3 Kit Part
No.
Frame D4 Kit Part
No.
Frame E2 Part No.
70.9 in [1800 mm]
176F1824
176F1823
Not possible
78.7 in [2000 mm]
176F1826
176F1825
176F1850
86.6 in [2200 mm]
176F0299
Kit Contents
•
Ductwork components
•
Mounting hardware
•
Gasket material
•
Delivered with D1 and D2 frame kits:
•
175R5639 - Mounting templates and top/bottom cut-out for Rittal enclosure.
•
Delivered with E1 frame kits:
•
175R1036 - Mounting templates and top/bottom cut-out for Rittal enclosure.
All fasteners are either:
•
0.39 in [10 mm], M5 Nuts torque to 2.3 Nm (20 in-lbs)
•
T25 Torx screws torque to 2.3 Nm (20 in-lbs)
3.5.1. Installation of Rittal Enclosures
This illustration shows the full size template
included with the kit and two drawings that
may be used to locate the cut-outs for the top
and bottom enclosure plates. The duct work
may also be used to locate the openings.
3.29: Templates
VLT
®
HVAC DRIVE High Power
Instruction Manual
3. How to Install
MG.11.F1.22 - VLT
®
is a registered Danfoss trademark.
37
3
Содержание FC 100 Series
Страница 131: ...7 Annexes VLT HVAC DRIVE High Power Instruction Manual 7 Annexes MG 11 F1 22 VLT is a registered Danfoss trademark 131 7...
Страница 133: ...VLT HVAC DRIVE High Power Instruction Manual 7 Annexes MG 11 F1 22 VLT is a registered Danfoss trademark 133 7...
Страница 134: ...7 Annexes VLT HVAC DRIVE High Power Instruction Manual 134 MG 11 F1 22 VLT is a registered Danfoss trademark 7...
Страница 135: ...VLT HVAC DRIVE High Power Instruction Manual 7 Annexes MG 11 F1 22 VLT is a registered Danfoss trademark 135 7...