d&b audiotechnik SL Series, Руководство по монтажу

Страница: 41 / 79

SL-Series rigging components
Loading the cart
When the cart is loaded with KSL-SUB cabinets only, simply stack
the cabinets onto the cart and interconnect them using their Front
and Rear links as follows:
1. Attach the first cabinet to the cart.
↳Due to the guide lugs at the front, left/right and rear of the
cart, the cabinet is centered on the cart.
2. Attach the second cabinet and interconncet the cabinets as
described in the previous section
Þ
3.16.2 "E7492 Touring
cart SL-SUB/SL-GSUB"
Þ
"Loading the cart" on page 39.
3. For the third cabinet, proceed in the same manner.
Adapter frame storage tray
The cart also allows the storage of a SUB cabinet assembly with
the KSL-SUB Adapter frame already mounted to the bottom SUB
cabinet.
For this purpose, the cart is equipped with dedicated supports at
the front left and right [3a] and corresponding Locking pins [3b]
(Type C, 10 x 35 mm) as well as two slots [4] acting as guide rails
to fix the assembly in place.
To store the assembly in the cart, proceed as follow:
1. Slowly lower the assembly onto the cart until the front supports
fit into the slots of the adapter frame.
2. Release the Locking pins on the cart from their park positions.
3. Insert the Locking pins to the frame on both sides and ensure
they are fully inserted and locked.
d&b SL-Series Rigging manual 1.10 en 41