d&b audiotechnik SL Series Скачать руководство пользователя

Страница: 24 / 79

SL-Series rigging components

3.7 B2447.072 Lever hoist
With SL-Series line arrays in Compression mode, we recommend

the use of the B2447.072 Lever hoist in connection with the d&b

SL-Series compression sets to manually curve (compress) the array.
The lever hoist provides a compression force of up to 1.0 ton

(10 kN) which corresponds to the maximum permitted

compression force.
Apart from the gear housing, load chain and hooks, the lever hoist

consists of the following controls and indicators:
[1]

Free chain knob.

[2]

Lever mode selector:

N: Neutral.

UP: Lifting - clockwise.

DN: Lowering - counter clockwise.

[3]

Lever.

[4]

Load indicator:

Green: Safe load

Continue operation.

Red: Overload

Lever kinks

Stop operation.

3.7.1 Operation
Free chaining operation

WARNING!
Potential risk of personal injury and/or

damage to material.

Do NOT operate the hoist in free chaining mode under

load.

In free chaining mode, the brake is released and the load chain

can be freely pulled through the hoist in either direction to its

required length.
1. Set the lever mode selector

[2] to the neutral (N) position.

2. Pull the free chain knob

[1].

↳During free chaining operation, pull the chain slowly and

continuously.

d&b SL-Series Rigging manual 1.10 en

Содержание SL Series
















































































Результаты поиска

Содержание SL Series

Отзывы:

Похожие инструкции для SL Series

Бренды по названию

Популярные бренды

d&b audiotechnik SL Series, Руководство по монтажу

Результаты поиска

Содержание SL Series

Отзывы:

Похожие инструкции для SL Series

Бренды по названию

Популярные бренды