Dalsa Linea2 5GigE, Руководство пользователя

Страница: 97 / 164

90 • Operational Reference Linea2 5GigE Series Camera
Display Name Feature & Values Description Standard
& View
Acquisition Mode
AcquisitionMode Set the acquisition mode of the device. It defines the
number of frames to capture during an acquisition and the
way the acquisition stops.
Beginner
Single Frame SingleFrame One frame is captured for each AcquisitionStart Command.
An AcquisitionStop occurs at the end of the Active Frame.
Multi-Frame MultiFrame A sequence of frames is captured for each AcquisitionStart
Command. The number of frames is specified by
AcquisitionFrameCount feature. An AcquisitionStop occurs
at the end of the Active Frame(s).
Continuous Continuous Frames are captured continuously with AcquisitionStart
until stopped with the AcquisitionStop command.
Acquisition Stop Mode AcquisitionStopMode Controls how the AcquisitionStop command and the
acquisition stopped using a trigger, ends on an ongoing
frame.
Beginner
Complete Complete When stopped during a frame, the device will continue
acquisition of lines until the specified height is reached to
deliver a complete default size frame
Immediate With
Padding
ImmediateWithPadding Acquisition stops immediately even during a frame but the
remaining of the frame will be padded with data to deliver
a complete default height frame.
Complete With Padding
on Timeout
CompleteWithPaddingOnTimeout When stopped during a frame, the device will continue
acquisition of lines until the specified height is reached or
a trigger timeout occurs. In the case of a timeout the
remaining frame will be padded with data to deliver a
complete default height frame.
DFNC
Acquisition Frame
Count AcquisitionFrameCount Number of frames to be acquired in MultiFrame acquisition
mode.
Beginner
Acquisition Arm Cmd AcquisitionArm Arms the device before an AcquisitionStart command. This
optional command validates all the current features for
consistency and prepares the device for a fast start of the
acquisition. If not used explicitly, this command is
automatically executed at the first AcquisitionStart but will
not be repeated for subsequent ones unless a data
transfer related feature is changed in the device. (WO)
Guru
Acquisition Start Cmd AcquisitionStart Start image capture using the currently selected
acquisition mode. The number of frames captured is
specified by AcquisitionMode feature. (WO)
Beginner
Acquisition Stop Cmd AcquisitionStop Stops the Acquisition of the device at the end of the
current frame unless the triggerFrameCount feature is
greater than 1. (WO)
Beginner
Acquisition Abort Cmd AcquisitionAbort Aborts the acquisition immediately. This ends the capture
without completing the current Frame or aborts waiting on
a trigger. If no acquisition is in progress, the command is
ignored. (WO)
Beginner
Internal Acquisition FPS
(in Hz) internalAcquisitionFPS Specifies the camera internal frame rate, in Hz. Use the
AcquisitionFrameRate feature to control this value.
Guru
DFNC
Resulting Frame Rate resultingTransferFPS
Reports the transfer frame rate based on the current
AcquisitionFrameRate and
internalAcquisitionFrameDropCount . This feature does not
take bandwidth limitations into account.
Guru
DFNC
Transfer Control TransferControlMode Sets the method used to control the transfer. Expert
Basic Basic
Basic mode ensures maximum compatibility but does not
allow for control of the transfer flow.
User Controlled UserControlled Manual mode allows maximum control of the transfer flow.