Dalsa Falcon 4M30, Руководство пользователя

Страница: 77 / 86

Falcon 4M Camera Manual
DALSA 03-032-20044-01
77
Command Syntax Parameters Description
set exposure mode
sem m
Set the exposure mode. Available
values are:
2
: Internal programmable frame rate
and exposure time using commands
ssf
and
set
4: Smart EXSYNC, frame rate and
exposure time controlled by CC1
(user EXSYNC)
6: Frame rate controlled by CC1,
exposure time controlled by
set
set exposure time
set f
Sets the exposure time to a floating
point number in µs. Allowable range
depends on snapshot mode, window
size, cameralink mode, etc..
set fpn coefficient
sfc xyi
Set the FPN coefficient.
where xy falls in the range from 1, 1 to
2352, 1728.
i
= FPN value in the range
0
to
1023
.
set number frame
dumps
snd i
Sets the number of fast frame dumps
when either snapshot modes 1 or 2 are
active (
efd
1 or 2, respectively).
set output
throughput
sot m
Sets the camera's total throughput in
mega-pixels per second. Valid values
are: 130, 160, 260 and 320.
set prnu coefficient
spc xyi
Set the PRNU coefficient.
Where xy falls in the range from 1, 1 to
2352, 1728.
i
= PRNU value in the range
0
to
12287
.
set subtract
background
ssb ti
Subtract this value from the output
signal.
t
= Tap selection. Allowable value is
0
for all taps.
i
= Subtracted value in a range from
0
to
511
.
set sync frequency
ssf f
Sets the frame rate in Hz to a value
from
1
to
60.4
(4M60) or
1
to 30.6
(4M30).
set system gain
ssg t i
Sets the digital gain.
t
= Tap selection. Allowable value is
0
for all taps.
i
= Gain value is specified from
0
to
65535
. The digital video values are
multiplied by this number.
Parameters:
t
= tap id
i
= integer value
f
= real number
s
= string
m
= member of a
set