Falcon 4M Camera Manual
DALSA 03-032-20044-01
51
3.8 Offset and Gain Adjustments
Setting Analog Offset
Purpose:
Sets the analog offset.
Syntax:
sao t i
Syntax Elements:
t
Tap selection. Allowable value is
0
for all taps.
i
Analog offset value. Extreme range is
0
-
511
but dynamic
range is dependent of the camera’s current exposure mode
and gain settings. A value of 100 does not equal an offset of
100DN.
Notes:
•
When flat field correction is enabled the expectation is that in
the dark the signal level is 0DN. Some users might required a
non-zero dark output. This can be achieved by increasing
analog offset.
•
Take care not to increase SAO too much with FFC enabled,
otherwise a PRNU-induced FPN pattern will result. Keep the
dark offset below 5 DN (10 bit).
•
The offset increases linearly with higher values.
•
Entering a large value offset will cause the camera to digitally
saturate the output image.
•
The resulting analog offset value depends on other camera
parameters such as temperature, frame rate, and exposure
mode.
•
The upper input limit of the offset remains the same regardless
of the exposure mode
Example:
sao 0 20
Factory Calibrated Analog Gains
The camera has a factory calibrated analog gain setting. Adjustment of analog gain is not
available to the user, however, digital gain is available as set system gain
ssg
.
Содержание Falcon 4M30
Страница 63: ...Falcon 4M Camera Manual DALSA 03 032 20044 01 63 ...
Страница 71: ...Falcon 4M Camera Manual DALSA 03 032 20044 01 71 Note User EXSYNC not present in sem 2 ...
Страница 81: ...Falcon 4M Camera Manual DALSA 03 032 20044 01 81 ...
Страница 83: ...Falcon 4M Camera Manual DALSA 03 032 20044 01 83 ...