DIS-2/M StreamerPro HDD Large UTP
50
Dallmeier electronic
Canceling the setting
In order to cancel part or all of a setting you first have to click on the button for the recording
mode you wish to use to overwrite the previous recording mode setting (in the example,
Fig. 10-18, Permanent).
By tracing a square, the previously made
selection can now be completely or partially
undone.
You can also set a number of different recording modes in the weekly plan.
The way that this is done is always the same:
1. Select the recording mode by clicking on
the corresponding button.
2. Specify the time period by tracing a square.
Deactivating recording
Recording a track can be stopped temporarily if certain time intervals are defined as not
active in the week schedule.
¾
Click on the not active button and then specify the time period in the way described
above.
¾
All settings are implemented by clicking on OK.
IMPORTANT
If you click on Cancel, none of the settings made will be
implemented. All settings made before the last time the
Scheduler dialog box was opened will, however, be retained.
Fig. 10-18
Fig. 10-19